$29.89 - $25.40
(as of Mar 02,2021 04:00:52 UTC – Details)
Focusing on in-vehicle electronic products, CHGeek contributes to fulfill the needs of majority of automotive users.
CHGeek 2 in 1 Design 10W Qi Fast Charging Wireless Car Charger Auto Clamping Car Cell Phone Mount Windshield Dashboard Air Vent Phone Holder
Faster Wireless Charging (1 * usb c charging cable is included)
10W Fast Wireless Charging Model : Samsung Galaxy Note10 / S10 / S10+ /S10e / S9 Plus /S9 / S8 Plus / S8 /S7 /S7 / S6 Edge; Note 9 / 8; LG V30 / V40 / G7, etc7.5W Fast Wireless Charging Model : iPhone 11 / 11 Pro / 11 Pro Max / XS / XS Max / X / 8 / 8+5W Standard Charging Model: Samsung S6/S6 edge, Note 5 and other Qi-enabled smartphone.
Wide Compatibility with Auto Clamping
Automatic opening and clamping design can be operated with one hand. Just place your phone inside the holder, the clamps will close and provide a strong stable hold. A gentle touch on any sides of the quick release buttons,the arms would automatically open. The arm clamp can be flexibly adjusted for 4.7 ~ 6.3 inches devices.
LED Indicator Light
Always keeps your driving safe.Cchecks whether the connection is successful.
When the red light is always on, it is in standby state;
When the blue light is always on, it is in normal charging state;
When the red light flashes, the foreign matter is detected.
Powerful Soft Suction Cup with Push Switch
The viscous suction cup + switch uses the pressure principle to exhaust the internal air through pressure, so that the wireless charging and the car window, etc are firmly and closely attached.
The suction cup is made of PVC and has an area of 33.17 cm², which greatly increases the adsorption force and firmly adheres to the the car window, etc.
2.Remove with no trace
Open the switch and pull the wireless car charger mount out to remove it. After removing it, it will not hurt the car window, etc. Support repeated use, after multiple adsorption, it is recommended to clean and dry before use.
Rotary Air Outlet Clip
Support any air outlet with fan blades.
Compared with the traditional spring clips, the rotary air outlet clamp can be firmly fixed on the air conditioner blades of any thickness, and it will not be shaken left and right during driving. Roads that are bumpy roads and sharp turns can also be applied.
Adopt flexible silicone material, Non-slip, no injury to the car.
The bracket can be extended, and the overall length is up to 18cm after stretching.
Adopts a universal spherical design, which can make the holder’s head rotate in all directions according to the individual needs.
When the suction cup is fixed, the bracket bearing can rotates within 210 degrees.
1. The wireless car charger
2. usb c charging cable
3. Rotary Air Outlet Clip
4. User Manual
360° Rotating Sphere
The package include
Please READ below quick guidance before using
1. Unable to charge/ Slow charge / Charging intermittently:
Check the Car Charger: Please Plug the cable into QC 3.0 car charger to ensure fast charging; Non-QC car charger, 2.4A car charger or USB Port don’t support fast charging and supply enough power to this device. Package comes with Type C Cable, but Car Cigar Lighter are not included. Check if the Phone Case is compatible with wireless charging: Please remove thick, uneven or rugged case,metal ring holder, metal attachments and credit cards for optimal charging. Be sure your phone case is NOT thicker than 4~8mm (0.16 inches) . Be sure the Charging Coil alignment: Please adjust the bottom bracket to make the phone at the wireless charging Inductive center. It will fail to charge if placed improperly.Preventing your phone from overheating: We suggest you close Apps to reduce power consumtion and turn off phone screen during wireless charging.Red Light of lower tray means Unable to Charge: 1) Please adjust the telescope tray to align; 2) the case isn’t compatible with wireless charging; 3) plug the cable into the QC3.0 Car Charger.
2. The suction cup won’t stay or be attached to the dash:
How to ensure strong adsorption of the suction cup? The bottom is washable suction cup and pad. Rinsing and air drying the suction cup and pad after using for a long time can restore their stickiness. We do not recommend to apply the suction cup on leather, wall or filmed glass surfaces as the suction cup is designed with strong viscosity and attraction. How to ensure the stability: We suggest you use the STICKY GEL PAD in irregular surface of the dashboard , and then press the suction cup on the pad to ensure the STABILITY. Make Sure Press the Swtich Lock of suction CupNOTE: The bottom suction cup maybe harden when it is cold. this may affect the sticky function of the sucker, so we suggest you warming up the sucker pad from hot air blowing on it from the vent firstly, then stick it on the dashboard or other surface About the air vent: Only support horizontal and vertical air vent, not support the round air vent.
3. Clamping Arms won’t work:
Please plug the cable into the QC3.0 car charger to ensure that the motor have enough electricity when you clamp or release the phone, otherwise the clamping arms will not move.Battery damage.
【AUTOMATIC CLAMPING with RADIAN DESIGN】 With advanced sensors, the wireless car charger make everything easier and safer. Place the phone in the holder and the wireless charger will automatically clamp firmly and charges the device. The release button is placed on both sides of the holder, making it easy to touch and release the phone, whether you are on the left or right
【2 in1 DESIGN】2-IN-1 Design combines the Qi Wireless Charger and a car phone holder, allows for a secure hands-free experience. Keep you away from the tangled locating cords or cables. Cell phone holder is suitable for car Windshield Dashboard Air Vent installation, and makes GPS and phone call more convenient
【FOREIGN OBJECT DETECTION with LED ALARM】When there is a metal substance between the wireless car charger holder and the device, the car charger will stop charging and the red light flashes to alarm. Effectively avoid high temperature metal damage during the wireless charging process to avoid the safety hazard. Effectively avoid the damage of the mobile phone caused by the high temperature of the metal, and play a protective role
【THICK PHONE CASE FRIENDLY】No need to remove your phone case (fits for most of phone cases in the market except rugged, uneven case) while charging.The car holder can hold all phones case with a width of 40-80mm tightly, which works very well for all QI-enabled phones